Authorised distributor of Ceramic, Swimming Pool Mosaic,
Decore Mosaic, Sanitary Ware, Uridan Waterless Urinal,
Hansgroh Mixer, Marbles, Special Mosaic Design, more
...

Waterless Urinal

 

How uridan Water-Free Urinals Work

There are No replaceable waste cartridges required for uridan® water-free urinals.
A biodegradable odour blocking fluid urilock® is poured into the waste trap and floats on the surface of the urine to create a perfect seal, blocking any urine odours.
Urine flows through the urilock® and out of the waste pipe.
urilock® blocking fluid remains effective for approximately 5000 –7000 visits. See Maintenance section for instructions on replacing the urilock® blocking fluid.
The uridan® water-free urinal is simplicity itself.
Ceramic urinals – for vertical drainpipe, type KV-5
 

1. Install bracket no. (19). The urinal hangs on these brackets.
2. Make sure the correct distance of 110 mm from the wall
    to the centre of the pipe.
3. uridan® urinal should be held against the wall and slide
    the urinal down over the bracket no. (19) and ensuring
    the bottom of the waste trap is secure in the waste outlet.
4. Insert the small PVC pipe ( B) in the water lock and
    afterwards pour approximately 1 litre water.
5. Insert the stainless steel cover ( A ).
6. Then pour 1 bottle – 0,3 litre urilock® fluid over the cover.
7. Apply silicon sealant around the edge of the urinal –
    between the urinal and the wall.
The urinal is ready for use now!
Important: Never pour urilock® fluid before the stainless
steel cover is insert.

 

  1 | 2 | 3 | 4 | 5   <<Previous