Authorised distributor of Ceramic, Swimming Pool Mosaic,
Decore Mosaic, Sanitary Ware, Uridan Waterless Urinal,
Hansgroh Mixer, Marbles, Special Mosaic Design, more
...

Waterless Urinal

 

How uridan Water-Free Urinals Work
There are No replaceable waste cartridges required for uridan® water-free urinals.
A biodegradable odour blocking fluid urilock® is poured into the waste trap and floats on the surface of the urine to create a perfect seal, blocking any urine odours.
Urine flows through the urilock® and out of the waste pipe.
urilock® blocking fluid remains effective for approximately 5000 –7000 visits. See Maintenance section for instructions on replacing the urilock® blocking fluid.
The uridan® water-free urinal is simplicity itself.
Fibreglass pedestal urinals – for vertical drainpipe, type GVF-1.
 

1. Using drill template from packing box.
2. Mount bracket no. (1). The urinal hangs on this bracket.
3. Mount bracket no. (3) to fasten the foot.
4. The urinal should be held against the wall and slide
    the urinal down over the bracket no. (1) and no. (3)
    ensuring the bottom of the waste trap is secure
    in the waste outlet.
5. Insert the small PVC pipe (B) in the water lock
    and afterwards pour approximately 1 litre water.
6. Insert the stainless steel cover (A).
7. Then pour 1 bottle – 0,3 litre urilock fluid over the cover.
8. Apply silicon sealant around the edge of the urinal –
    between the urinal and the wall..
The urinal is ready for use now!
Important: Never pour urilock® fluid before the stainless
steel cover is insert.

 

Next>>   1 | 2 | 3 | 4 | 5   <<Previous